NiTek X Computer

#CO8200

A mixed gas computer with full decompression capabilities that monitors seven different gas mixes including helium, nitrogen and oxygen. Uses a modified Bühlmann ZH-L16 algorithm with 75/95, 40/100 and 30/75 gradient factors. Custom gradient option comes standard with the unit.

During a decompression dive, the NiTek X provides real time decompression information based on diver pre-set gas mixes. Gases can also be changed, if necessary, during the dive.

Simple to program, the NiTek X has intuitive menus that are easy to understand without complex instructions. A lightweight frame along with a large, 2.7-inch (6.85 cm) screen makes it easy to keep track of the dive plan at a glance. The NiTek X displays data in both imperial and metric measurements. It is upgradeable for closed circuit rebreathers including constant PO2 set point and external oxygen sensor decompression capabilities. Optional cable for 4th cell [continued]

integration. Made in the U.S.A.

  • Monitors up to 7 different gas mixtures including helium, nitrogen and oxygen
  • Underwater gas switching, plus changing between open and closed circuit
  • Modified Bühlmann ZH-L16 algorithm with gradient factors
  • Standard custom gradient factor
  • Oxygen exposure tracking display via OLI (oxygen limit index) bar graph
  • OTU available by download with desktop logbook program
  • Visible warnings for PO2, deco violation, ascent rate, and fourth cell error for CCR
  • Dive mode screen will display prior to entering water
  • Date, time and water temperature display
  • Current and max depth display
  • Dive time elapsed and no-decompression time remaining display
  • Desaturation and time-to-fly information display
  • Back lighting with 10 second LCD visible in all light conditions
  • [continued]
  • Logbook will hold a minimum of 15 hours based on settings
  • PC and MAC uploadable with NiTek Workbench software and optional PC interface
  • Maximum depth 492 feet (149 meters)
  • Adjusts automatically for altitude up to 19,685 (6,000 meters)
  • Imperial and Metric units of measure
  • User replaceable lithium CR123A battery
  • 3.9-inches wide X 3.7-inches high X 0.78-inches thick (9.9cm wide x 9.39 cm high x 1.98 cm thick)
  • Mil-Spec Hard anodized aluminum case with scratch-resistant, mineral glass screen
  • 12 oz. (340 gms)

Dive Rite will—at its sole discretion—repair or replace NiTek X components proved to be damaged by faulty manufacture or material, at no cost, for a period of up to one year from the date of purchase.

This warranty applies only to the original retail purchaser. It does not cover commercial or rental use, nor does it extend to units purchased from other than an authorized Dive Rite dealer.

This warranty specifically excludes battery depletion or other conditions resulting from misuse, negligence, alteration, accident, or unauthorized repair.

Find our complete Warranty Policy here: Warranty Policy

product

related
products

NiTek X PC/MAC Transfer Cable
The Nitek X PC/MAC Transfer Cable is a low profile USB cable that plugs into the Fischer connection on the NiTek X. Workbench software is a web-based program with the following features: NiTek Control – Allows user to program gases and other features accessed under the “SET” menu on the dive computer, eliminating the need to push buttons on the NiTek X in order to set menu selections.Dive Log – Downloads up to 15 hours of dive time with programmed gases and dive profile

Dive Rite is the pioneering creator of technical SCUBA diving equipment for advanced, wreck and cave diving. Our Catalog is vast, ranging from backplates, harnesses and wings (BCDs) to regulators, lights, drysuits and rebreathers. To purchase Dive Rite technical dive gear, find a dealer near you. Also, see the Tech Tour schedule to learn if the Dive Rite team will be near you soon.