Argon Bottle Regulator

Catalog : Regulators :

#EX949

Our Argon Bottle Drysuit Inflation Regulator is a compact first stage regulator that can be used on any 200 BAR DIN valve. Measuring only 2 3/8-inches (6 cm) tall, this is the most compact suit inflation regulator available. It has an unbalanced piston first stage with an intermediate pressure of 120 psi and includes an over pressurization valve.

NOTE: The Argon Bottle Drysuit Inflation Regulator is designed for drysuit inflation only. It is not designed, tested or intended for breathing use.

• Two low pressure ports (3/8-24 UN)
• Temperature rating: 50 to 95 F (10 to 19 C)
• Intermediate pressure of 120psi
  
• 8 oz (226.8 g)

• Regulator Manual - Argon Bottle Regulator
  EX949 User Manual. Posted 2.28.2008
• What is O2 Clean?
  Original article written by former Dive Rite marketing guy, Harry Avril

Dive Rite warrants this regulator against any and all defects in materials and workmanship throughout its useful life. This warranty does not apply to normal wear and tear, mouthpieces, hoses, o-rings, diaphragms, filters, valve seats, or any cosmetic damage and extends only to its original owner. Misuse, neglect, unauthorized service, as well as any modifications voids this warranty.

Although this warranty is not contingent upon any annual service, it is highly recommended that any and all regulators receive an annual safety inspection performed by factory authorized personnel. Factory or authorized dealer servicing is required every 200 hours of dive time or every 2 years whichever occurs first.

This warranty applies only to regulators purchased from authorized Dive Rite Dealers. Find our complete Warranty Policy here: Warranty Policy

related
products

1-inch Button SPG Rated to 5000 psi in 1000 psi increments, our 1-inch Button SPG is ideal for use with pony, Argon and bailout bottles when all you need is an indication of full or empty