16-lb Weight Pockets
#AC3215-16
DISCONTINUED: MARCH 1, 2009
The 16-lb Weight Pocket System is ideal for warm water diving where less weight is needed or for any diver who requires 16-pounds (3.6 kg) or less of weight. Tall and narrow, the 16-lb Weight Pocket system leaves plenty of room on the waist belt for other accessories. The design of these pockets does not take much space on the waist band making it ideal for divers of smaller stature. Each pocket consists of a pocket insert that holds the lead and fits inside the weight pocket holster. This set of right and left hand pockets are designed for use with the TransPac Harness or TransPlate Harness. The 16-lb Weight Pocket System mounts over the stainless steel side plates of the harness to weight the diver and aid with trim. The pockets are set at an angle, which helps divers to easily slip the holster into the pocket with one hand while wearing the BC. The top-loading weight pocket gives added security [continued]
that weight will stay in place, while the Velcro flap quickly releases allowing divers to quickly dump the weight or hand it off to a boat divemaster before climbing aboard a dive boat. The insert can also be secured to the holster with the safety buckle if the diver wishes not to utilize the quick ditch feature. If lost or irretrievable, the weight pocket inserts are sold separately and can be easily replaced. A nickel-plated brass grommet on the bottom allows for drainage and quick drying. Made in the U.S.A.
Weight may vary based on denominations used to fill the pocket.
Please note: The 16-lb Weight Pocket was last manufactured in 2008.
- Holds up to 8 lbs (3.6 kg) in each pocket
- 1680 denier ballistic nylon fabric is tear and abrasion resistant.
- Two-inch (50.8 mm) nylon webbing loops on the back of the pocket slide over a standard 2-inch webbing waist strap and secure the pocket into place.
- Heavy-duty Velcro secures pocket flap and resists sagging and stretching.
- Acetyl quick release buckle is used to easily secure the pocket in the holster.
- Nickel plated brass grommets resist rust and corrosion.
- 9-in high x 3.5-in wide x 1.5-in deep (22.9 cm x 8.9 cm x 3.8 cm)
- 12 oz (340.2 g)
- Made in the U.S.A.
- Weight Pockets - T2133 and T2128
User manual for T2133 and T2128 weight pockets
Zoomify image...
related
products
 | TransPac Harness Inspired by a remote dive exploration in Japan where divers had to hike their heavy gear through dry portions of cave to get to the underwater sumps |
Dive Rite is the pioneering creator of technical SCUBA diving equipment for advanced, wreck and cave diving. Our Catalog is vast, ranging from backplates, harnesses and wings (BCDs) to regulators, lights, drysuits and rebreathers. To purchase Dive Rite technical dive gear, find a dealer near you. Also, see the Tech Tour schedule to learn if the Dive Rite team will be near you soon.