32-lb Weight Pockets
#AC3215-32
DISCONTINUED: MARCH 1, 2009
The 32-lb Weight Pocket System is ideal for cold water diving where more weight is needed due to thick exposure protection. Each pocket consists of a pocket insert that holds the lead and fits inside the weight pocket holster. This set of right and left hand pockets are designed for use with the TransPac Harness or TransPlate Harness. The 32-lb Weight Pocket System mounts over the stainless steel side plates of the harness to weight the diver and aid with trim. The pockets are set at an angle, which helps the diver to easily slip the holster into the pocket with one hand while wearing the BC. The top-loading weight pocket gives added security that weight will stay in place, while the Velcro flap quickly releases allowing divers to quickly dump the weight or hand it off to a boat divemaster before climbing aboard a dive boat. The insert can also be secured to the holster with the safety buckle if [continued]
the diver wishes not to utilize the quick ditch feature. If lost or irretrievable, the weight pocket inserts are sold separately and can be easily replaced. A nickel-plated brass grommet on the bottom allows for drainage and quick drying. Made in the U.S.A.
Weight may vary based on denominations used to fill the pocket
Please note: The 32-lb Weight Pocket was last manufactured in 2008.
- Holds up to 16 lbs (7.25 kg) in each pocket
- 1680 denier ballistic nylon fabric is tear and abrasion resistant.
- Two-inch (50 mm) nylon webbing loops on the back of the pocket slide over a standard 2-inch webbing waist strap and secure the pocket into place.
- Heavy-duty Velcro secures pocket flap and resists sagging and stretching.
- Delrin quick release buckle is used to easily open and close the pocket.
- Nickel plated brass grommets resist rust and corrosion.
- 8.5-in high x 6-in wide x 1.5-in deep (21.6 cm x 15.3 cm x 3.8 cm)
- 1.13 lb (0.51kg)
- Made in the U.S.A.
Zoomify image...
related
products
 | TransPac Harness Inspired by a remote dive exploration in Japan where divers had to hike their heavy gear through dry portions of cave to get to the underwater sumps |
Dive Rite is the pioneering creator of technical SCUBA diving equipment for advanced, wreck and cave diving. Our Catalog is vast, ranging from backplates, harnesses and wings (BCDs) to regulators, lights, drysuits and rebreathers. To purchase Dive Rite technical dive gear, find a dealer near you. Also, see the Tech Tour schedule to learn if the Dive Rite team will be near you soon.