Classic Wing
#BC2030, #BC4350-DUAL
DISCONTINUED: OCT 15, 2009
The Classic Wing is technical diving's first buoyancy compensator, originally introduced to the diving world by Dive Rite in 1985. Designed specifically for use with double cylinders, the Classic Wing is the most streamlined wing of its kind on the market. Its streamlined shape comes from the unique side panels that maintain lift capacity, while minimizing drag by reducing overall width.
The Classic can be a single (BC2030) or dual bladder (BC4350-DUAL) wing. Its unique bladder design allows a single bladder Classic to be altered to become a dual bladder wing at a later date, if desired.
The Classic Wing provides up to 60 pounds/27 kg of lift and can accommodate two 104 ft3/17 L back mounted cylinders and one 80 ft3 /11 L stage bottle. Tough, ballistic nylon outer bags protect the wing from tears and abrasion. The 15-mil urethane bladder is abrasion resistant, chemical resistant [continued]
and resists the growth of microorganisms. Choice of 16-inch rapid exhaust (pull dump), 16-inch or 12-inch elbow, or Ritesource integrated octo corrugated hose along with either 15-inch, 22-inch or 27-inch low-pressure inflation hose. The Classic Wing is designed for use with the TransPac, TransPlate or any webbing-style harness. Made in the U.S.A.
Please note: the Classic Wing is designed for use with medium to heavyweight double tanks and is not for use with single tanks.
- Outer bags are made of 1000 denier ballistic nylon that resists tears and abrasion.
- Inner bladder constructed of thick, 15-mil polyether aromatic polyurethane is resistant to abrasion and chemicals, has excellent strength and will resist the growth of microorganisms.
- Urethane flanges are welded in place, which make it easy to switch out corrugated hoses and over pressurization valves without tools.
- Comes equipped with choice of 16-inch rapid exhaust (pull dump), 16-inch or 12-inch elbow, or Ritesource integrated octo corrugated hose along with either 15-inch, 22-inch or 27-inch low-pressure inflation hose.
- Two sets of three marine-grade 316 stainless steel grommet mounting holes are used to attach wing to harness and/or to double tanks and set diver trim.
- Approximate dimensions uninflated: 28-in H x 23-in W (71cm x 58.4cm)
- [continued]
- 2.81lbs (1.27kg)
- Classic, Rec, Nomad Model 2009
Owners manual for the BC 2030 Classic Wing. Updated 3.24.2009
Dive Rite BCs carry a limited lifetime warranty. Dive Rite will — at its sole discretion — repair or replace BCs proved to be damaged by faulty manufacture or material, at no cost, for the lifetime of the BC. This warranty applies only to the original retail purchaser.
It does not cover commercial or rental use, nor does it extend to units purchased from other than an authorized Dive Rite dealer. This warranty specifically excludes color changes, light fastness, or fading. Dive Rite does not accept responsibility for stains or transference or bleeding of color to other items.
All BC bladders have a limited lifetime warranty against RF welded seam separation. No warranty exists for bladder punctures. If we deem a BC to be beyond repair — through no fault of the user — then, and only then, will we replace the affected component(s).
Please see our complete Warranty and Repair Policy listed [continued]
Zoomify image...
related
products
 | Basic Harness For those who prefer a streamlined rig without buckles, chest strap or padding, the Basic Harness is a clean, simple harness intended for use with hard metal backplates |
more
images
Dive Rite is the pioneering creator of technical SCUBA diving equipment for advanced, wreck and cave diving. Our Catalog is vast, ranging from backplates, harnesses and wings (BCDs) to regulators, lights, drysuits and rebreathers. To purchase Dive Rite technical dive gear, find a dealer near you. Also, see the Tech Tour schedule to learn if the Dive Rite team will be near you soon.