Horseshoe Rec Wing

#BC2074, #BC2074-DUAL

Designed to be worn with double tanks or singles, the Rec Wing is a versatile wing for those who wish to dive doubles or single tanks. Best suited for tall divers or divers who require more buoyancy at the waist, the Rec Wing employs a Gusset Control System (GCS) cord woven through tabs on the front face of the wing. When tightened, the cord limits lift capacity so the Rec Wing can be used with single, backmount tanks. When the GCS cord is loosened, the Rec Wing provides its full lift capacity of 45 pounds/20.4 kg* of lift and can accommodate two 95 ft3/15 L back mounted cylinders.

The Rec can be a single (BC2074) or dual bladder (BC2074-DUAL) wing. Its unique bladder design allows a single bladder Rec to be altered to become a dual bladder wing at a later date, if desired.

Loose or tight, the GCS cord helps the Rec Wing maintain a small profile for divers traversing in tight passages and the cord compression helps [continued]

in dumping air. Tough, ballistic nylon outer bag protects the wing from tears and abrasion. The 15-mil urethane bladder is abrasion resistant, chemical resistant and resists the growth of microorganisms. Choice of 16-inch rapid exhaust (pull dump), 16-inch or 12-inch elbow, or Ritesource integrated octo corrugated hose along with either 15-inch, 22-inch or 27-inch low pressure inflation hose. The Rec Wing is designed for use with the TransPac, TransPlate or any webbing-style harness. Made in the U.S.A.

*As of July 1, 2011 lift measurement on all Dive Rite wings has been revised to reflect the most recent lift testing based on European CE requirements. Please note the wing itself has not changed.

  • Black outer bag is made of 1680 denier ballistic nylon fabric to resist tears and abrasion.
  • Inner bladder constructed of thick, 15-mil polyether aromatic polyurethane is resistant to abrasion and chemicals, has excellent strength and will resist the growth of microorganisms.
  • Urethane flanges are welded in place, which make it easy to switch out corrugated hoses and over pressurization valves without tools.
  • Comes equipped with choice of 16-inch rapid exhaust (pull dump), 16-inch or 12-inch elbow, or Ritesource integrated octo corrugated hose along with either 15-inch, 22-inch or 27-inch low pressure inflation hose.
  • Two sets of three marine-grade 316 stainless steel grommet mounting holes are used to attach wing to harness and/or to double tanks and set diver trim.
  • [continued]
  • Approximate dimensions uninflated: 27.5-in H x 24-in W (69.8cm x 60.9cm)
  • 3.12 lbs (1.41kg)
  • To avoid unnecessary wear and tear, remove metal backplates from the wing for transport and do not carry a metal plate stuffed into a dive bag along with a wing and other soft goods.

Dive Rite BCs carry a limited lifetime warranty. Dive Rite will — at its sole discretion — repair or replace BCs proved to be damaged by faulty manufacture or material, at no cost, for the lifetime of the BC. This warranty applies only to the original retail purchaser.

It does not cover commercial or rental use, nor does it extend to units purchased from other than an authorized Dive Rite dealer. This warranty specifically excludes color changes, light fastness, or fading. Dive Rite does not accept responsibility for stains or transference or bleeding of color to other items.

All BC bladders have a limited lifetime warranty against RF welded seam separation. No warranty exists for bladder punctures. If we deem a BC to be beyond repair — through no fault of the user — then, and only then, will we replace the affected component(s).

Please see our complete [continued]

href="">Warranty Policy listed under Products/Customer Service on our website.

Zoomify image...


TransPlate Harness
A hybrid harness designed for divers who want the support of a backpack-style harness for better weight-load distribution, yet wish to dive a hard metal backplate



Dive Rite is the pioneering creator of technical SCUBA diving equipment for advanced, wreck and cave diving. Our Catalog is vast, ranging from backplates, harnesses and wings (BCDs) to regulators, lights, drysuits and rebreathers. To purchase Dive Rite technical dive gear, find a dealer near you. Also, see the Tech Tour schedule to learn if the Dive Rite team will be near you soon.