SCUBA Diving Equipment for Technical, Sidemount, Rebreather, Wreck and Cave Diving: Dive Rite, Inc - Product Catalog

Nomad Wing

#BC2083

Designed specifically for use with the Nomad Sidemount System, the Nomad Wing delivers 60 pounds/27 kg of lift, allowing divers to dive any size tanks using a wet suit or a dry suit. Available as either a dual bladder wing or single bladder wing, the Nomad provides excellent streamlining by integrating the harness through wing keepers that hold the wing low across the diver’s back and reduces drag. Proper trim is achieved with a longer wing and a Gusset Control System (GCS) cord that is woven through tabs on the front face of the wing. The GCS cord is positioned on the upper portion of the wing, forcing the lower part of the wing to inflate preferentially, keeping lift around the divers hips where it is needed. Tough, ballistic nylon outer bag protects the wing from tears and abrasion. The 15-mil urethane bladder is abrasion resistant, chemical resistant and resists the growth of microorganisms. Choice of 16-inch or 12-inch [continued]

elbow corrugated hose along with 15-inch, 22-inch or 27-inch low-pressure inflation hose. Made in the U.S.A.

Please note: the Nomad Wing is designed for use with the TransPac as part of the Nomad Expedition Rig.

Black outer bag is made of 1680 denier ballistic nylon that resists tears and abrasion.
Inner bladder constructed of thick, 15-mil polyether aromatic polyurethane is resistant to abrasion and chemicals, has excellent strength and will resist the growth of microorganisms.
Urethane flanges are welded in place, which make it easy to switch out corrugated hoses and over pressurization valves without tools.
Comes equipped with choice of 16-inch rapid exhaust (pull dump), 16-inch or 12-inch elbow corrugated hose along with either 15-inch, 22-inch or 27-inch low pressure inflation hose.
Corrugated hose come with 1000 denier sleeve to protect against punctures.
Three marine-grade 316 stainless steel grommet mounting holes are used to attach wing to harness.
Made in U.S.A.

Dive Rite BCs carry a limited lifetime warranty. Dive Rite will — at its sole discretion — repair or replace BCs proved to be damaged by faulty manufacture or material, at no cost, for the lifetime of the BC. This warranty applies only to the original retail purchaser.

It does not cover commercial or rental use, nor does it extend to units purchased from other than an authorized Dive Rite dealer. This warranty specifically excludes color changes, light fastness, or fading. Dive Rite does not accept responsibility for stains or transference or bleeding of color to other items.

All BC bladders have a limited lifetime warranty against RF welded seam separation. No warranty exists for bladder punctures. If we deem a BC to be beyond repair — through no fault of the user — then, and only then, will we replace the affected component(s).

Please see our complete Warranty and Repair Policy listed [continued]

under Products/Customer Service on our website.

Zoomify image...