Nomad

#BC3100P

The original, this Nomad is a true explorers kit, complete with tank hardware necessary to sidemount tanks. And, with lift increased to 60lbs/27kg, divers can wear a wetsuit and high volume steel tanks with confidence.

Streamlining is achieved by integrating the TransPac® harness through wing keepers that hold the wing low across the back to reduce drag. Proper trim comes from the longer wing and a Gusset Control System (GCS) cord that is woven through tabs on the front face of the wing. The GCS cord is positioned on the upper portion of the wing, forcing the lower part of the wing to inflate preferentially, keeping lift around the divers hips where it is needed. Utilizing the TransPac® harness, tanks are attached with a bungee and buttplate system that allows the tanks to ride closely at the diver's side, yet not be jammed under the arms, as this can "A-framing" when backing out of tight restrictions. [continued]

A standard 2-inch crotch strap is included.

Made in the U.S.A. CE EN250 Approved.

    The Nomad Expedition Rig is completely customizable as follows:

    • TRANSPAC HARNESS available in sizes M, L, XL, XXL, and L Tall, XLTall or XXL Tall
    • WING is available as a single bladder or dual bladder
    • Choice of 12-inch, 16-inch or 22-inch elbow corrugated hose along with either 15-inch, 22-inch or 27-inch low-pressure inflation hose. Common configuration is 16-inch corrugated hose with a 15-inch low-pressure inflation hose for an average 6-foot, 225lb man. Please adjust according to chest size, height and individual preference.
    • BUTTPLATE available in Standard or 4XL size. If weight or body dimension is 275 lbs +, please order the 4XL buttplate.
    • BUNGEES available in 11, 13, 15, 17, 19-inch or any custom size you prefer.
    • [continued]
    • Common length when sidemounting tanks with a stage strap and choker is 13-inch for an average 6-foot, 225lb man. Common length when sidemounting tanks using the bungee system only is 17-inch. Petite individuals may opt for 11-inch and 15-inch respectively. Broad individuals 15-inch for stage strap and choker or 19-inch for sidemount using bungee system only.
    • Note: Dive Rite is happy to SHORTEN any bungee length if you find what you ordered is too long. Call us and send them back using our standard RMA process. However, if you order the bungees too short, we CANNOT lengthen them.
    • [continued]
      The Nomad comes standard with the following sidemount tank hardware:
      • CAM STRAPS come standard as 2-inch webbing with stainless steel buckle, 36-inches in length. Low-profile, 1.5-inch cam straps (BC2036-1.5) are available separately or as an upgrade and preferred by sidemounters for the smaller, less obtrusive buckle. Strength of the cam strap is not altered by size.
      • BELT SLIDES come standard as two stainless steel, 2-inch belt slides. If ordering 1.5-inch low profile cam straps, please request two, stainless steel 1.5-inch belt slides instead.
      • [continued]
        • STAGE STRAP (GM2053) comes standard with two, stage straps kits that include two HW1092 XL Bolt Snaps (can be switched for HW1042 Butterfly snaps if preferred), vinyl tubing, 1-inch nylon webbing and 1-inch belt slide to secure the snap. Hose clamps normally found on stage bottles are replaced by cam straps when sidemounting.
        • Note: Snaps can be switched for HW1042 Butterfly snaps, if preferred. Belt slides can be changed from 2-inch to 1.5-inch if selecting the low profile cam straps.
        • HOSE RETAINER (GM2052-80) comes standard with two, 80 cu ft bottle (7.25-inch diameter) hose retainers. Larger hose retainers are available for 8-inch diameter bottles for divers who may sidemount steel 95s, 104s, 121s, etc.
        • [continued]
          • CHOKER (BC2720-CHOKER) comes standard with two, nylon tank neck chokers to attach the Nomad bungee clip to and secure the bottle easily under the arm.
          • Nomad weight (without tank hardware) Med: 9.375lbs (4.25kg), Lg: 9.625lbs (4.36kg), XL: 10.06lbs (4.56kg)
          • When diving the Nomad with backmount double cylinders, CCR or single tanks, divers may find it more comfortable to add our BC1035 Lumbar Pad. As of Oct 1, 2007 the Nomad comes standard with Velcro strips to accommodate the Lumbar Pad. Previous Nomad owners may send their Nomad to Dive Rite for a retrofit.

          Zoomify image...

          related
          products

          Low Profile Cam Strap
          Our 1.5 inch (3.8cm) wide cam strap is small and low profile, yet strong with excellent tensile strength

          Dive Rite is the pioneering creator of technical SCUBA diving equipment for advanced, wreck and cave diving. Our Catalog is vast, ranging from backplates, harnesses and wings (BCDs) to regulators, lights, drysuits and rebreathers. To purchase Dive Rite technical dive gear, find a dealer near you. Also, see the Tech Tour schedule to learn if the Dive Rite team will be near you soon.