Classic Series

#BC4400, #BC5400

The Classic Series is an adjustable lift wing, sporting an optional Gusset Control System cord that can be used to further streamline the wing for wreck diving penetrations or smaller size doubles. The GCS is not a bungee wing because it does not restrict air flow; instead the GCS promotes added streamlining and buoyancy control, yet allows the wing to inflate to its full capacity.

Available in a single or dual bladder, the Classic Series offers 65lbs/27.2kg of lift, accommodating two 104ft3/17L back mounted cylinders and two 80ft3/11L stage bottles. The Classic XT is for use solely with double tanks.

Divers may choose from our value-driven and durable 1680 ballistic nylon EXP material or our SuperFabric® brand technology XT material that we’ve married with a 1000 denier Cordura® inner shell to create an armor-clad outer bag that is impervious to damaging pinches and cuts. Both the Classic EXP (Model [continued]

BC 4400) and Classic XT (Model 5400) are further enhanced with a heavy-duty, 210 denier nylon laminated bladder. They are backed by our WORRY-FREE LIFETIME GUARANTEE and are made exclusively in the U.S.A.

As a part of our modular BCD system, it can be matched with either a TransPac® XT, Transplate or any metal backplate and webbing harness.

  • Model BC4400 Classic EXP outer bag is made of durable 1680 denier ballistic nylon that resists tears and abrasion.
  • Model BC5400 Classic XT outer bag is made of SuperFabric brand technology and 1000 denier Cordura® offering superior durability.Inner bladder is constructed from heavy-duty 210 denier nylon laminated bladder which is highly resistant to pinches and punctures
  • Urethane flanges are welded in place, which make it easy to switch out corrugated hoses and over pressurization valves without tools
  • Comes equipped with choice of 16-inch or 12-inch elbow or 16-inch rapid exhaust (pull dump) along with either 15-inch, 22-inch or 27-inch low-pressure inflation hose
  • Two sets of marine-grade 316 stainless steel grommet mounting holes are used to attach wing to harness and set diver trim
  • [continued]
  • Approximate dimensions uninflated: 24-in H x 26-in W (60.9cm x 66.0cm)
  • 3lbs (1.3kg)
  • To avoid unnecessary wear and tear, remove metal backplates from the wing for transport and do not carry a metal plate stuffed into a dive bag along with a wing and other soft goods.

We are proud to support our XT Series Wings with an exclusive WORRY-FREE, LIFETIME GUARANTEE! Dive Rite will repair or replace XT Wings proved to be damaged by faulty manufacture or material, at no cost, for the lifetime of the wing. This warranty applies only to the original retail purchaser. Please note that it does not cover commercial or rental use, nor does it extend to units purchased from other than an authorized Dive Rite dealer.

product

related
products

TransPac Stabilizer Plates
The stainless steel TransPac Stabilizing Plates firmly secure a TransPac to any set of double tanks that use industry-standard bands and bolts

Dive Rite is the pioneering creator of technical SCUBA diving equipment for advanced, wreck and cave diving. Our Catalog is vast, ranging from backplates, harnesses and wings (BCDs) to regulators, lights, drysuits and rebreathers. To purchase Dive Rite technical dive gear, find a dealer near you. Also, see the Tech Tour schedule to learn if the Dive Rite team will be near you soon.